European Ocean Biodiversity Information System

[ report an error in this record ]basket (1): add | show Print this page

one publication added to basket [330252]
The influence of system settings on positioning accuracy in acoustic telemetry, using the YAPS algorithm
Vergeynst, J.; Baktoft, H.; Mouton, A.; De Mulder, T.; Pauwels, I. (2020). The influence of system settings on positioning accuracy in acoustic telemetry, using the YAPS algorithm. Animal Biotelemetry 8(1): 25. https://dx.doi.org/10.1186/s40317-020-00211-1
In: Animal Biotelemetry. BioMed Central/Springer Nature: London. e-ISSN 2050-3385
Peer reviewed article  

Available in  Authors 
    Vlaams Instituut voor de Zee: Open access 352550 [ download pdf ]

Authors  Top 
  • Vergeynst, J.
  • Baktoft, H.
  • Mouton, A.
  • De Mulder, T.
  • Pauwels, I.

Abstract

    Background

    Acoustic positioning telemetry allows to collect large amounts of data on the movement of aquatic animals by use of autonomous receiver stations. Essential in this process is the conversion from raw signal detections to reliable positions. A new advancement in the domain is Yet Another Positioning Solver (YAPS), which combines the detection data on the receivers with a model of animal movement. This transparent, flexible and on-line available positioning algorithm overcomes problems related to traditional point-by-point positioning and filtering techniques. However, its performance has only been tested on data from one telemetry system, providing transmitters with stable burst interval. To investigate the performance of YAPS on different system parameters and settings, we conducted a simulation study.

    Results

    This paper discusses the effect of varying burst types, burst intervals, number of observations, reflectivity levels of the environment, levels of out-of-array positioning and temporal receiver resolution on positioning accuracy. We found that a receiver resolution better than 1 ms is required for accurate fine-scale positioning. The positioning accuracy of YAPS increases with decreasing burst intervals, especially when the number of observations is low, when reflectivity is high or when information out-of-array is used. However, when the burst interval is stable, large burst intervals (in the order of 1 to 2 min) can be chosen without strongly hampering the accuracy (although this results in information loss). With random burst intervals, the accuracy can be much improved if the random sequence is known.

    Conclusions

    As it turns out, the key to accurate positioning is the burst type. If a stable burst interval is not possible, the availability of the random sequence improves the positioning of random burst interval data significantly.


All data in the Integrated Marine Information System (IMIS) is subject to the VLIZ privacy policy Top | Authors